The small squares above the elongated hours makers are orange, as are the words “Speedmaster” Omega Replica Watches on the dial and “Tachymètre” on the bezel. On the minutes totalizer at three, you’ll find the first three markers in orange as well, which is a playful nod to the show. And the supplied woven mil-strap is accented with a bright orange stripe.
There are some other great flourishes here. There’s an applied logo right below twelve, and the dial is stepped—nods to Omega Speedmaster Replica of yesteryear. The luminous paint is parchment toned rather than classic white. At the seconds register at nine, the classic stick hand is replaced with a custom one.
Other than that, you get all the mainstays of a modern Speedmaster Replica Watches, among them a Hesalite crystal and Omega’s 1861 caliber.
The Omega Speedmaster Replica is an iconic watch, and its aesthetic is well known. The black dial with contrasting white markings and hands. The distinctive case profile with those twisted “lyre” lugs. That domed crystal rising above the inky, black tachymeter bezel.
There are five different watches that make up the Tuetonic range. (1) Black and (2) gray dials in a stainless steel case, (3) black and (4) two-tone dials in a two-tone case, and the (5) Mark V, which uses a slightly different case due to the thicker 1045 automatic caliber—Omega Replica Watches version of the iconic Lemania 5100 central-minutes chronograph movement.
The bezel measures 39 millimeters in diameter, but with the case splaying out on the three o’clock side towards the pushers and crown it stretches to 44 millimeters across. The Omega Replica lug-to-lug length is only 46 millimeters, so despite taking slightly more wrist real estate than a regular Speedmaster, the Teutonic wears smaller and more comfortably than you might think at first glance.
The case edges and lines are mostly soft and flowing, and the bead-blasted finish adds to this effect. The chronograph pushers and crown are rounded and deeply set within the Omega Replica Watches Swiss Movement case, and though the case lines threaten to resolve to a sharp point against the back of your hand, the angles soften again to create a gentle recess. The protrusion of the case on the right side is offset and echoed by the concave scallop at the top and bottom lugs where the integrated bracelet meets the case.
The bracelet itself is fairly lightweight, but the flat links and pronounced taper match the aesthetics of the Best Omega Replicawatch perfectly. The three-link design gives off a sporty and unmistakably ’80s vibe, and, due to the lug design, it’s visible on both sides of the wrist when the watch is viewed face on. From other angles, the line of the bracelet continues up into the scalloped areas of the case.
The latest edition of the Omega Speedmaster Replica “First Omega in Space” is in 18k Sedna gold Fake Watches, with the dial chapter ring, sub-dials and ceramic bezel insert in dark brown.
A fade-resistant rose gold alloy developed by Omega Replica Watches Swiss Movement, Sedna gold is used in most of Omega’s priciest watches. Not only is it used for the watch case, but also the hands on the dial, including the hands on the chronograph registers.
The dial only reads “Omega” and “Speedmaster”, just as it did in 1962. “Professional” was only added in 1966, after NASA selected the timepiece as its official wristwatch. The Fake Omega case measures 39.7mm in diameter, with the hand-wound Lemania 1861 movement inside.
Thought numbered sequentially on the case back, the Speedmaster “First Omega in Space” is not a limited edition. It’s also engraved “October 3, 1962” on the back, the date of Schirra’s mission to space.